What Is a Temporary Power Pole?
It is a freestanding pole, usually wood, with a meter socket, a breaker panel and outlets mounted at a fixed height, set in the ground near your site's electrical tie-in point. Temporary power pole requirements vary by utility, but most call for the same basic parts: meter socket, main breaker, grounding rod and weatherproof enclosure. The utility company runs service to the meter, and your site draws power from the panel until permanent wiring is finished. A typical setup carries a 200 amp panel, which covers most trailers, saws, pumps and lighting on a mid-size job. If you are also running a light tower or powering a restroom trailer rental with pump-driven fixtures, the pole needs enough headroom to carry both loads without tripping breakers. Anyone setting up a construction site services package in Peoria should plan the power pole alongside the temporary fence rental and dumpster placement, since all three usually land in the same staging area. A rough temporary power pole diagram helps: pole location, distance to the utility transformer, distance to your panel, and clearance for a roll-off dumpster rental delivery, which needs about 60 feet of straight clearance behind the truck.
How Much Does Temporary Power Pole Installation Cost?
Installing a temporary power pole for a construction temporary power pole setup depends on trenching distance, permit timing and whether the utility company needs to schedule a meter set. Every site in Peoria is different, and the pole itself is only part of the bill; labor and inspection add to it. We do not carry a fixed price for this service because utility scheduling varies by neighborhood, but we can walk your site and quote it against your construction dumpster rental and temporary fence rental needs at the same time. If you're budgeting the whole site setup, our construction site services page breaks down what typically bundles together, and our request a quote form gets you a number fast.
Where Can I Install a Temporary Power Pole in Peoria?
Placement depends on where the utility transformer sits and how far your panel needs to reach, and confirming exact placement rules for the right-of-way in Peoria needs a call to the city before you dig. General industry standard, OSHA 1910.141(c)(1)(i), governs toilet ratios on non-construction jobs, but power pole placement is a separate conversation with your electrician and the utility. We recommend siting the pole where it will not block your temporary fence rental line or the swing radius for a 40ft storage container or 20ft storage container delivery. Keep clear of your handwashing station rental and portable sink rental placement too, since standing water near a panel is a hazard nobody wants on an inspection report. Peoria sites near Sun City West, about 10.9 miles south, and Anthem, roughly 20.5 miles east, follow the same basic layout logic: pole near the transformer, panel near the load, clear access for delivery trucks.
How long does temporary power pole installation take?
Once the utility schedules the meter set, physical installation of the pole itself usually takes a single day. The bottleneck is almost always utility scheduling, not the pole work. Book early if your Peoria job has a hard start date, especially alongside portable toilet rental and fencing deliveries.
Do I need a permit for a temporary power pole?
Most jurisdictions require one, but Peoria's exact permit process needs confirming directly with the city before you schedule installation. Check our dumpster permit requirements page for a sense of how permit questions get handled on parallel services, then call the city for the power pole specifically.
What size service do most construction sites need?
A 200 amp panel covers most mid-size sites running saws, pumps, a few lights and a job trailer. Larger sites with multiple light tower rental units or a luxury restroom trailer running pumps may need more. Your electrician sizes the load before ordering.
Can I rent a power pole without an electrician?
No. The utility company requires a licensed electrician to wire the panel and coordinate the meter set before power gets turned on. Peoria Porta Pros can schedule the pole delivery, but the electrical hookup itself is licensed work.
Does OSHA regulate temporary power on construction sites?
Yes. OSHA 1926.404(b)(1)(ii) requires ground fault circuit interrupter protection on construction sites, which applies to temporary power setups including panels fed from a pole. Your electrician handles GFCI compliance as part of the install.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.